www.LaserFX.com Home Page - CLICK HERE

  Home Page >>> Backstage Area >> Laser Show Systems > Pinouts

Search LaserFX.com - CLICK HERE Site Map - CLICK HERE
LaserFX.com Home Page
Backstage.LaserFX.com
Laser Safety
Laser Hobbyists
Laser Show Systems

Introduction

System Design

Scanning Systems

Support Equipment

Laser Graphics

Show Production

Pinouts

 
Standards and Practrices
Laser F/X Newsletter
Unclassified Ads
Business Issues
Laser Show Discussions
Archives and Download
Laser Show Resources
Updates Page - CLICK HERE
Member Services - CLICK HERE
LaserFX.com Banner Ads - CLICK HERE
About Laser F/X - CLICK HERE
Contact Us - CLICK HERE

 

Laser Show Systems - Pinouts

DISCLAIMER: The pinouts shown here were contributed by manufacturers, vendors and individuals. While every effort has been made to insure accuracy, LaserFX.com can not be responsible for any errors or omissions.

 

MVM logo

MVM new PCAOM driver card edge connector pin-out

Pinout for the edge connector on the new MVM driver cards [72 pin card edge connector] for 8 channel PCAOM. This is NOT an official MVM document - for the latest info, contact: msha1@aol.com

 

Power supply

+15 VDC .67A (minimum) - Digi-Key part number TS9987-ND or equivalent

Card edge connector pinout

Pin Number Signal description
1, 2, 3, 4 N/C (no connection)
5 & 6 Ground
7 +15VDC @ 3/4 A Input
8 through 36 N/C (no connection)
37 Input Channel 8 (+)
38 Input Channel 8 (-)
39 Input Channel 7 (+)
40 Input Channel 7 (-)
41 Input Channel 6 (+)
42 Input Channel 6 (-)
43 Input Channel 5 (+)
44 Input Channel 5 (-)
45 Input Channel 4 (+)
46 Input Channel 4 (-)
47 Input Channel 3 (+)
48 Input Channel 3 (-)
49 Input Channel 2 (+)
50 Input Channel 2 (-)
51 Input Channel 1 (+)
52 Input Channel 1 (-)
53 Blanking Input
54 Blanking Input
55 through 64 N/C (no connection)
65 Mod 8 (+) Red
66 Mod 8 (-) Red
67 Mod 5 (+) Green
68 Mod 5 (-) Green
69 Mod 1 (+) Blue
70 Mod 1 (-) Blue
71 Blanking
72 N/C (no connection)

 

DISCLAIMER: Some of the information in the Backstage area is provided by the persons or companies named on the relevant page(s). Laser F/X does NOT endorse or recommend any products/services and is NOT responsible for the technical accuracy of the information provided.  We provide this information as a service to laserists using the Backstage area. 

 [ Introduction - System Design - Scanning Systems - Support Equipment - Laser Graphics - Show Production - Pinouts ]

 

1996-2008 Laser F/X International and LaserFX.com - All rights reserved.
Logos and trademarks are the property of their respective owners - used by permission.