Home Page >>> Backstage Area >> Laser Show Systems > Pinouts

Laser Show Systems - Pinouts

DISCLAIMER: The pinouts shown here were contributed by manufacturers, vendors and individuals. While every effort has been made to insure accuracy, LaserFX.com can not be responsible for any errors or omissions.

NEOS 4 channel PCAOM DB9F connector pin-out

Pinout for the DB9F input connector on the driver for the NEOS 4 channel PCAOM. This is NOT an official NEOS document - for the latest info, contact: neos@neostech.com

DB9 Female connector

NOTE:

1/ Internal jumper selects ground or +5 VDC output when used with blanking card

DISCLAIMER: Some of the information in the Backstage area is provided by the persons or companies named on the relevant page(s). Laser F/X does NOT endorse or recommend any products/services and is NOT responsible for the technical accuracy of the information provided.  We provide this information as a service to laserists using the Backstage area. 

 [ Introduction - System Design - Scanning Systems - Support Equipment - Laser Graphics - Show Production - Pinouts ]